(906) 883-3536

Inventory

Financing available through express

Forestry Equipment For Sale

Number of Matches: 26 | This Page: 1 of 2
Unit:
Currency:

Featured Listings

Forestry Equipment - Feller Buncher

2010 TIMBERPRO TN735B at MachineryTrader.com

2010 TIMBERPRO TN735B

Super clean unit inside and out. Very well maintained. Know the history of this machine very well. It's 100% woods ready. We're located 70 miles North of Eagle River, WI and 70 miles East of Hurley, WI. 8,600 hrs. New undercarriage 1,500 hours ago. U/C at roughly 75%. New reman 300 HP Cummins eng...
Condition: Used
For Sale Price:USD $189,500
 10
Updated: Tue, Nov 14, 2017 10:56 AM

Forestry Equipment - Processor / Harvester

2006 TIMBCO 415EX at MachineryTrader.com

2006 TIMBCO 415EX

Very clean inside and out. 14,600 hrs. Excellent undercarriage. Dasa computer with Risley joystick controls. Heat and A/C. Strong finals and pumps, ready for work! Came directly off of the job. Strong running, very durable, very efficient and dependable Sisu 6 cylinder diesel engine. These motors...
Serial Number: TC-2865-020507
Condition: Used
For Sale Price:USD $119,000
 10
Updated: Tue, Nov 14, 2017 10:56 AM

General Listings

Forestry Equipment - Feller Buncher

2005 TIGERCAT 720D at MachineryTrader.com

2005 TIGERCAT 720D

Very nice buncher. Clean inside and out. Low hours, only 8,750. Heat & A/C. Reversing Fan. Hydrostatic drive. 5.9 Cummins Engine, runs excellent. Everything works as it should, it's woods ready. 20" Tigercat 5600 series hotsaw head in good working condition. Rubber is roughly 50% but the right re...
Condition: Used
For Sale Price:USD $49,500
 7
Updated: Tue, Nov 14, 2017 10:56 AM
2009 VALMET 430FXL at MachineryTrader.com

2009 VALMET 430FXL

We're located 3 hrs. from Duluth in the Western U.P. Excellent undercarriage. 360 degree head. Espar pre-heater. Heat & A/C. Self leveling cab. 6,898 original hours. Paint is original. Clean inside and out. Quadco 360 degree bunching head. IQAN diagnostics. Reversing fan. Cummins 8.3, runs excell...
Hours: 6,898
Condition: Used
For Sale Price:USD $189,500
 12
Updated: Tue, Nov 14, 2017 10:56 AM

Forestry Equipment - Forwarder

BELL T12B at MachineryTrader.com

BELL T12B

Bell 12T 6x6, Cummins 4cly., power-shift, Cran-ab loader joystick controls, 700 rear rubber, 28Lx26 fron
Serial Number: 1255
Condition: Used
For Sale Price:USD $38,500
 4
Updated: Thu, Dec 14, 2017 1:24 PM
2006 DEERE 1010D at MachineryTrader.com

2006 DEERE 1010D

4045HT Deere Engine - One Owner - 12,500 Hrs - One Set of Chains - 30.5 - 32 Tires - Hydrostatic Drive
Serial Number: WJ1010D003804
Condition: Used
For Sale Price:USD $109,500
 8
Updated: Tue, Nov 14, 2017 10:56 AM
2005 FABTEK 546C at MachineryTrader.com

2005 FABTEK 546C

We're located 250 miles Northwest of the bridge in the Western U.P. Nice owner operated forwarder here. Recent reman 6068T Deere engine. New starter. Heat & A/C. Pre Heater. IQAN diagnostic display. Joystick controls on seat. 13,877 original hours. Squirt boom. Rubber in decent shape overall. Hyd...
Hours: 13,877
Condition: Used
For Sale Price:USD $129,500
 12
Updated: Tue, Nov 14, 2017 10:56 AM
2005 FABTEK 546C at MachineryTrader.com

2005 FABTEK 546C

2005 Fabtek 546C, complete re-built engine, new rear-end, new jib cly., new rotate motor on bucket, 700 rear rubber, 30.5x32 front We may take trades depending on what you have. We can help with shipping costs. Contact John for more information 9063644318
Condition: Used
For Sale Price:USD $129,000
 4
Updated: Tue, Nov 14, 2017 10:56 AM
1998 FABTEK 548B at MachineryTrader.com

1998 FABTEK 548B

1998 Fabtek 548B, 8x8, Deere engine, very good 700 rubber, cold A/C
Condition: Used
For Sale Price:USD $80,000
 4
Updated: Tue, Nov 14, 2017 10:56 AM
2000 FABTEK 548C at MachineryTrader.com

2000 FABTEK 548C

Nice machine here. We know the previous owner. Owner operated machine. 13,950 hours. Heat & A/C. Pro Heat. Good rubber all around, 700/50-26.5 rubber. Excellent running 6068T Deere engine. No oil leaks or blow by. Transmission shifts excellent. Clean inside and out. Tracks to go with it. IQAN dia...
Hours: 13,950
Condition: Used
For Sale Price:USD $120,000
 9
Updated: Tue, Nov 14, 2017 10:56 AM
2013 ROTTNE F15C at MachineryTrader.com

2013 ROTTNE F15C

Super clean inside and out. 4,500 hrs. Tier 3 Deere 6068 engine. RK 125 Crane with crane tilt. 15 ton capacity with wide load bunks. Most spacious cab in the industry. Two sets of tracks like brand new go with the sale. Rubber is like new, size is 710/45x26.5. One owner forwarder and super well m...
Condition: Used
For Sale Price:USD $275,000
 12
Updated: Wed, Dec 13, 2017 12:58 PM
1998 TIMBCO 820C at MachineryTrader.com

1998 TIMBCO 820C

Great working forwarder. Only used to haul crane mats. 9,000 original hours. New hour meter installed when new Cummins engine was installed. 8.3 Cummins rated at 280 HP. Heat and A/C. Sure Grip Bucket. IQAN Controls. 28L-26 Rubber at roughly 50%. Flip Up Rack.
Hours: 9,000
Condition: Used
For Sale Price:USD $109,000
 7
Updated: Tue, Nov 14, 2017 10:56 AM
TIMBERJACK 610 at MachineryTrader.com

TIMBERJACK 610

Timberjack 610, 4x4, single bunk, Serco loader, joystick controls,cont. turn bucket, A/C, 23.1x26 rubber @ 80%, 15,398 hours
Hours: 15,398
Serial Number: 983339
Condition: Used
For Sale Price:USD $48,000
 4
Updated: Thu, Dec 14, 2017 1:24 PM
2005 TIMBERPRO TB630 at MachineryTrader.com

2005 TIMBERPRO TB630

2005 TimberPro TB630, Rolly II with topsaw, Cummins 8.3 engine, 750/55x26.5 rubber,tracks, 11,150 hours, nice clean machine
Hours: 11,150
Condition: Used
For Sale Price:USD $149,000
 4
Updated: Thu, Dec 14, 2017 1:24 PM
1998 TREE FARMER C5D at MachineryTrader.com

1998 TREE FARMER C5D

1998 Treefarmer C5, 4 cly. Cummins, power-shift, A/C, joystick control, 23.1x26 rubber
Condition: Used
For Sale Price:USD $45,000
 4
Updated: Thu, Dec 14, 2017 1:24 PM
2004 VALMET 840.2 at MachineryTrader.com

2004 VALMET 840.2

17,320 Hours. Sisu engine, runs great, very quiet and fuel efficient. Hydrostatic transmission. Cranab CRF-6 loader. Bunks are nice and straight. Webasto Pre-heater. 600x55x26.5 Tires all the way around. Heat, A/C, and Stereo. Maxi Display screen.
Serial Number: 840211291
Condition: Used
For Sale Price:USD $79,500
 8
Updated: Tue, Nov 14, 2017 10:56 AM

Forestry Equipment - Processor / Harvester

2006 ECO LOG 580B at MachineryTrader.com

2006 ECO LOG 580B

We're located North of the big bridge 4.5 hours. This is a bank repo and we're helping sell this machine. 3126 Cat Power, runs excellent. 14,556 hours. Suregrip controls. IQAN computer system. Log Mate 402 Computer. Fire suppression system. Log Max 7000 harvester head. Heat & A/C. Independent pen...
Condition: Used
For Sale Price:USD $59,500
 6
Updated: Tue, Nov 14, 2017 10:56 AM
2003 FABTEK FT133 at MachineryTrader.com

2003 FABTEK FT133

17,292 hours. Engine rebuilt 3,000 hrs. ago. New hydraulic pump 500 hours ago. New wiring harness from cab to head. Undercarriage in great condition, new sprockets. Clean interior. Straight machine and came straight from cutting wood daily. Red Dot climate control. Heat & A/C. John Deere 6068T en...
Hours: 17,292
Condition: Used
For Sale Price:USD $89,500
 5
Updated: Tue, Nov 14, 2017 10:56 AM
2000 FABTEK FT133 at MachineryTrader.com

2000 FABTEK FT133

2000 Fabtek FT-133, 4-roller head, 6068 Deere engine, 60% U/C
Condition: Used
For Sale Price:USD $85,000
 3
Updated: Thu, Dec 14, 2017 1:24 PM
2003 FABTEK FT153 at MachineryTrader.com

2003 FABTEK FT153

Good undercarriage, roughly 50%. Proheat. Heat and A/C. 6.8 Deere engine rated at 170 HP. Sure grip joystick controls. Independent measuring wheel. FT18R Processing head. Clean inside and out. New Hydraulic pump. New cylinder head, new injection pump, and injectors.
Serial Number: FA 00172
Condition: Used
For Sale Price:USD $89,500
 6
Updated: Tue, Nov 14, 2017 10:56 AM
2004 PONSSE BEAVER at MachineryTrader.com

2004 PONSSE BEAVER

2004, Ponsse Beaver, Mercedes engine, 600 rubber, 125 crane, H-60 harvesting head
Hours: 17,487
Condition: Used
For Sale Price:USD $89,500
 4
Updated: Thu, Dec 14, 2017 1:24 PM
1998 PONSSE HS10 COBRA at MachineryTrader.com

1998 PONSSE HS10 COBRA

Nice straight processor and priced to sell. 3116 Cat power rated at 215 HP. Hydro drive. HS 60 Processing head. 700x45x22.5 rubber. 25,154 hours. Ponsse 1000 Harvester display. Heat, A/C, and Radio. Fire suppression..
Serial Number: 890-119379
Condition: Used
For Sale Price:USD $49,500
 9
Updated: Tue, Nov 14, 2017 10:56 AM
2000 PONSSE HS16 ERGO at MachineryTrader.com

2000 PONSSE HS16 ERGO

We're located 250 miles Northwest of the big bridge in the Western U.P. This is a special unit here. Previously owned by Ponsse employee, it was his personal machine. 19,923 Hours. This machine is in excellent condition for the year. Super clean inside and out and everything works as it should! H...
Hours: 19,923
Condition: Used
For Sale Price:USD $59,500
 9
Updated: Mon, Dec 11, 2017 6:15 PM
2005 TIMBCO 415EX at MachineryTrader.com

2005 TIMBCO 415EX

We are located in MIchigan's Upper Peninsula, We do take trades depending on what you have, and can help with shipping! Nice unit here!!!!! Call John at 90636443182005 Timbco 415EX, Rolly II, 70% U/C, re-built head
Condition: Used
For Sale Price:USD $130,000
 3
Updated: Tue, Nov 14, 2017 10:56 AM